test mhvtl + scst + cent os6 + nbu7.0 (deployed in win2003), whether it is available.

[wallens]

i used mhvtl : mhvtl-2010-09-23.tgz scst :scst-2.0.0.1.tar.gz I now have two problems: A: When I configured apache, when using ie: http://10.0.0.99 prompted to visit when there are two error pages, that is not installed mhvtl, but I have obviously installed B：in 2003, has now been discovered using iscsi target, but the driver managed inside IBM ULT3580-TD SCSI sequential device driver does not always load after load on the use of SymantecDeviceDriversforWindowsServers20070215_287850.exe tape drive has a yellow exclamation point, and do not know If you connect the tape drive using nbu7.0 。

[nia]

Regarding the Web Console, are you using the latest release ? Please show the full screen shot.
Regarding the tape devices in windows .. did you install the IBM Windows Drivers ?

nia

[wallens]

hi！nia

Very glad to receive your message, just now is China in the morning  ;

Regarding the Web Console，i used     1.18.17-git-5f07911  ，i don't kown Web console whether the lstest one , i get is form mhvtl forum ;

in my win2003  32 bit  system ,wo used ibm device  As the attachment figure;  install install _itdt_ge.6.0.0.037.ext  ,Always is not installed Java virtual machine. i 'm try ibm. hp. quantum device, bus still  unsuccess.

    nia  , i need  your help.

 

2011-08-04

---

周泉

---

发件人： nia [via MHVTL - Linux Virtual Tape Library - Community Forums]

发送时间： 2011-08-04  05:23:52

收件人： wallens

抄送：

主题： Re: test mhvtl + scst + cent os6 + nbu7.0 (deployed in win2003),whether it is available.

Regarding the Web Console, are you using the latest release ? Please show the full screen shot.
Regarding the tape devices in windows .. did you install the IBM Windows Drivers ?

nia

---

If you reply to this email, your message will be added to the discussion below:

http://mhvtl-linux-virtual-tape-library-community-forums.966029.n3.nabble.com/test-mhvtl-scst-cent-os6-nbu7-0-deployed-in-win2003-whether-it-is-available-tp3221682p3223554.html

To unsubscribe from test mhvtl + scst + cent os6 + nbu7.0 (deployed in win2003), whether it is available., click here.

[nia]

You are using an old mhvtl version. Why don't you try the latest from github http://mhvtl-linux-virtual-tape-library-community-forums.966029.n3.nabble.com/ANNOUNCE-mhvtl-now-available-via-github-tp2204096p2204096.html

For the GUI, please setup sudo per documentation and you will also need a newer version of MHVTL as well.

[swanlet]

Dear Sir
    In my opinion, you make some mistakes
1. According to the following documentation
http://www.symantec.com/business/support/index?page=content&id=TECH51096,
 the device driver is not for Netbackup 7.0.
It is not neccessary to install the symantec netbackup device driver when you install netbackup 7
2. The Netbackup 7 media server is only supported on the x64 platform, not for 32 bit platform. so , you must install the IBM Tape driver for x64 platform .
3.  you must make sure , "netbackup device manager" service depand on the "MSiSCSI' service , that is , before the "netbackup device manager" services start, the "MSiSCSI' service must be started
Dear Sir , I am chinese-spoken person, if you want to talk to me, you can call me on QQ (781498220)

[Mark Harvey]

Although mhvtl defaults with IBM LTO-4/5 I find a STK T10000B drive emulation works really well with NetBackup.

Also the T10000B drivers are automagically discovered by windows 2003/2008

For what it is worth, the SymantecTapeDrivers are 32bit only and only recomened for tape drives manufactured before 2007. Any drives after 2007 should use manufactures drivers.

cheers

Mark

Sent from my iPad

On Aug 7, 2011, at 16:34, "swanlet [via MHVTL - Linux Virtual Tape Library - Community Forums]"<[hidden email]> wrote:

Dear Sir
    In my opinion, you make some mistakes
1. According to the following documentation
http://www.symantec.com/business/support/index?page=content&id=TECH51096,
 the device driver is not for Netbackup 7.0.
It is not neccessary to install the symantec netbackup device driver when you install netbackup 7
2. The Netbackup 7 media server is only supported on the x64 platform, not for 32 bit platform. so , you must install the IBM Tape driver for x64 platform .
3.  you must make sure , "netbackup device manager" service depand on the "MSiSCSI' service , that is , before the "netbackup device manager" services start, the "MSiSCSI' service must be started
Dear Sir , I am chinese-spoken person, if you want to talk to me, you can call me on QQ (781498220)

---

If you reply to this email, your message will be added to the discussion below:

http://mhvtl-linux-virtual-tape-library-community-forums.966029.n3.nabble.com/test-mhvtl-scst-cent-os6-nbu7-0-deployed-in-win2003-whether-it-is-available-tp3221682p3232581.html

To start a new topic under MHVTL - Linux Virtual Tape Library - Community Forums, email [hidden email]
To unsubscribe from MHVTL - Linux Virtual Tape Library - Community Forums, click here.

[wallens]

你好swanlet：

     关于2003下的驱动问题，我已经找到了驱动程序，用的是microsoft的补丁包就可以的，不过在测试的过程中我还遇到了其他的问题，我已经加了你的qq，看到消息后请您给我回复。

  

 

 

2011-08-09

---

周泉

---

发件人： swanlet [via MHVTL - Linux Virtual Tape Library - Community Forums]

发送时间： 2011-08-07  14:34:46

收件人： wallens

抄送：

主题： Re: test mhvtl + scst + cent os6 + nbu7.0 (deployed in win2003),whether it is available.

Dear Sir
    In my opinion, you make some mistakes
1. According to the following documentation
http://www.symantec.com/business/support/index?page=content&id=TECH51096,
 the device driver is not for Netbackup 7.0.
It is not neccessary to install the symantec netbackup device driver when you install netbackup 7
2. The Netbackup 7 media server is only supported on the x64 platform, not for 32 bit platform. so , you must install the IBM Tape driver for x64 platform .
3.  you must make sure , "netbackup device manager" service depand on the "MSiSCSI' service , that is , before the "netbackup device manager" services start, the "MSiSCSI' service must be started
Dear Sir , I am chinese-spoken person, if you want to talk to me, you can call me on QQ (781498220)

---

If you reply to this email, your message will be added to the discussion below:

http://mhvtl-linux-virtual-tape-library-community-forums.966029.n3.nabble.com/test-mhvtl-scst-cent-os6-nbu7-0-deployed-in-win2003-whether-it-is-available-tp3221682p3232581.html

To unsubscribe from test mhvtl + scst + cent os6 + nbu7.0 (deployed in win2003), whether it is available., click here.

[wallens]

hi！mark harvey:

    when i  try and try  , i'successful for used microsoft package ,now , nbu has worked on with mhvtl .

thank you .

    

 

 

2011-08-09

---

周泉

---

发件人： Mark Harvey [via MHVTL - Linux Virtual Tape Library - Community Forums]

发送时间： 2011-08-07  19:57:06

收件人： wallens

抄送：

主题： Re: test mhvtl + scst + cent os6 + nbu7.0 (deployed in win2003),whether it is available.

Although mhvtl defaults with IBM LTO-4/5 I find a STK T10000B drive emulation works really well with NetBackup.

Also the T10000B drivers are automagically discovered by windows 2003/2008

For what it is worth, the SymantecTapeDrivers are 32bit only and only recomened for tape drives manufactured before 2007. Any drives after 2007 should use manufactures drivers.

cheers

Mark

Sent from my iPad

On Aug 7, 2011, at 16:34, "swanlet [via MHVTL - Linux Virtual Tape Library - Community Forums]"<[hidden email]> wrote:

Dear Sir
    In my opinion, you make some mistakes
1. According to the following documentation
http://www.symantec.com/business/support/index?page=content&id=TECH51096,
 the device driver is not for Netbackup 7.0.
It is not neccessary to install the symantec netbackup device driver when you install netbackup 7
2. The Netbackup 7 media server is only supported on the x64 platform, not for 32 bit platform. so , you must install the IBM Tape driver for x64 platform .
3.  you must make sure , "netbackup device manager" service depand on the "MSiSCSI' service , that is , before the "netbackup device manager" services start, the "MSiSCSI' service must be started
Dear Sir , I am chinese-spoken person, if you want to talk to me, you can call me on QQ (781498220)

---

If you reply to this email, your message will be added to the discussion below:

http://mhvtl-linux-virtual-tape-library-community-forums.966029.n3.nabble.com/test-mhvtl-scst-cent-os6-nbu7-0-deployed-in-win2003-whether-it-is-available-tp3221682p3232581.html

To start a new topic under MHVTL - Linux Virtual Tape Library - Community Forums, email [hidden email]
To unsubscribe from MHVTL - Linux Virtual Tape Library - Community Forums, click here.

[wallens]

hi!Mark:

  in the morining ,i took lesssfs to this test system ,hope to be able to produce mhvtl tape duplication data delete ,lessfs has been installed successfully ,when the mount to the creation of my own catalog can ben normal used .but when i mount to /opt/mhvtl had new error ,"

fuse: mountpoint is not empty

fuse: if you are sure this is safe, use the 'nonempty' mount option"

 it 's   right ?  i think my fuse need configuration ,i do 't kown hao to config

 

 

2011-08-09

---

周泉

---

发件人： Mark Harvey [via MHVTL - Linux Virtual Tape Library - Community Forums]

发送时间： 2011-08-07  19:57:06

收件人： wallens

抄送：

主题： Re: test mhvtl + scst + cent os6 + nbu7.0 (deployed in win2003),whether it is available.

Although mhvtl defaults with IBM LTO-4/5 I find a STK T10000B drive emulation works really well with NetBackup.

Also the T10000B drivers are automagically discovered by windows 2003/2008

For what it is worth, the SymantecTapeDrivers are 32bit only and only recomened for tape drives manufactured before 2007. Any drives after 2007 should use manufactures drivers.

cheers

Mark

Sent from my iPad

On Aug 7, 2011, at 16:34, "swanlet [via MHVTL - Linux Virtual Tape Library - Community Forums]"<[hidden email]> wrote:

Dear Sir
    In my opinion, you make some mistakes
1. According to the following documentation
http://www.symantec.com/business/support/index?page=content&id=TECH51096,
 the device driver is not for Netbackup 7.0.
It is not neccessary to install the symantec netbackup device driver when you install netbackup 7
2. The Netbackup 7 media server is only supported on the x64 platform, not for 32 bit platform. so , you must install the IBM Tape driver for x64 platform .
3.  you must make sure , "netbackup device manager" service depand on the "MSiSCSI' service , that is , before the "netbackup device manager" services start, the "MSiSCSI' service must be started
Dear Sir , I am chinese-spoken person, if you want to talk to me, you can call me on QQ (781498220)

---

If you reply to this email, your message will be added to the discussion below:

http://mhvtl-linux-virtual-tape-library-community-forums.966029.n3.nabble.com/test-mhvtl-scst-cent-os6-nbu7-0-deployed-in-win2003-whether-it-is-available-tp3221682p3232581.html

To start a new topic under MHVTL - Linux Virtual Tape Library - Community Forums, email [hidden email]
To unsubscribe from MHVTL - Linux Virtual Tape Library - Community Forums, click here.