|
im facing this issue ..
even i installed every thing as mentioned in the readme file but still im facing the issue continiuing.. pl help me...
|
|
Administrator
|
can you run these manually from under your www root directory:
scripts/check_before_use.sh testphp scripts/check_before_use.sh testsudo scripts/check_before_use.sh testmhvtl scripts/check_before_use.sh testlsscsi scripts/check_before_use.sh testmt scripts/check_before_use.sh testmtx also this: cat /tmp/test.required.components.* |
|
admin..
none of the comands worked for me.. all said. no such file or directory.. i have attached these ouputs.. pl go through ![]() no file existed like test.required.com.. and file existed are the commands runned u have said.. that also had only the "no such file/directory" pl do some help.. |
|
Administrator
|
did you cd to the mhvtl-gui directory ? example, mine is under /var/www/html/mhvtl-gui |
|
yes admin,
as you said i tried but nothing ha[ppened.. then i searched out and find below.. my status is like below and im sorry that ihavent installed git before.. now all service are started anr working fine.. but some pipe line disabled is showing like below in image... pl help.. ![]()
|
|
I can't see any information as to the type of tape drives configured.
However media with a barcode of 'DD....S3' will be automagically defined as DLT600 media. I would recommend not using DLT type drives as the documentation is close to useless for these drives - hence emulation is also close to useless.. Use IBM 03592, IBM LTO, STK T10000, STK9x40, AIT 1,2,3,4, HP LTO drive types instead. Cheers Mark |
|
Administrator
|
In reply to this post by babu121314
You will see this if your mhvtl device.conf does not have the new fifo pipe option or mhvtl unable to create. By default, mhvtl creates fifo pipe under /var/tmp/mhvtl Can you run the following: ls -al /var/tmp/mhvtl cat /var/tmp/mhvtl Also, does the GUI login screen comes up now ? to indicate that all required components are verified OK ? Do you have sudo setup per documentation ? -nia |
|
thanks a lot admin,
it working...fine thanks so thaks.. one more help buddy.. i need some the details of netbackup installation .. how to do with mhvtl.. pl buddy..help. |
|
confirm NetBackup can see the devices using 'tpautoconf -t' and 'tpautoconf -r' or scan. If these utils report the drives, just configure NetBackup like you would with any devices (device configuration wizard) Sent from my iPad On Feb 27, 2012, at 2:34, "babu121314 [via MHVTL - Linux Virtual Tape Library - Community Forums]"<[hidden email]> wrote:
|
|
yes admin,
i clearly showing ..or detecting from the os .. the drives and robots are detectble from the linux os.. |
|
admin,
while im trying to activate policy and running it .. i am facing a problem in netbackup 6.5 which is showing as per the image uploaded, pl help. for the problem..
|
|
Can you please supply the /var/log/messages file for the time frame you saw the problem pls. Cheers Mark Sent from my iPad On Feb 28, 2012, at 3:10, "babu121314 [via MHVTL - Linux Virtual Tape Library - Community Forums]"<[hidden email]> wrote:
|
| Powered by Nabble | See how NAML generates this page |
